投标邀请
Invitation for Bids
招标项目名称：开平11-4油田18-1区块开发项目
Project Name: KP11-4 OIL FIELD BLOCK 18-1DEVELOPMENT PROJECT
招标编号（Bid No.）：0704-2540JDCP9095
中化建国际招标有限责任公司（以下称为“招标代理机构”）受中海石油（中国）有限公司深圳分公司（以下称为“招标人”）委托，就开平11-4油田18-1区块开发项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交密封投标：
CNCCC International Tendering Co., Ltd. (hereinafter referred to as “the Tendering Agent”), entrusted by CNOOC China Ltd. Shenzhen (hereinafter referred to as “Tenderee”), intends to purchase the Goods and the relevant services required under KP11-4 OIL FIELD BLOCK 18-1DEVELOPMENT PROJECT by International Competitive Bidding. Bidders are kindly requested to provide the following Goods and services with sealed bids.
1. 招标条件
Bidding Conditions：
项目概况：开平11-4油田位于南海东部偏西海域，距香港西南约295km，开平11-4油田包含11-4区块（水深340-360米）、18-1区块（水深460-530米）。 开平11-4油田18-1区块开发项目采用“水下生产系统回接圆筒型FPSO”模式进行开发。分为1d（1d/1dSa）、2d(2d、5)两套水下生产系统分别回接至新建的圆筒型FPSO。开平11-4油田18-1区块计划2029年投产。本采办包采购的原油外输计量标定撬将用于新建圆筒型浮式生产储卸油装置FPSO上。
Project Summary：The Kaiping 11-4 Oilfield is located in the west-eastern part of the South China Sea, approximately 295 kilometers southwest of Hong Kong. The Kaiping 11-4 Oilfield consists of Block 11-4 (with a water depth of 340-360 meters) and Block 18-1 (with a water depth of 460-530 meters). The development project of Block 18-1 of Kaiping 11-4 Oilfield adopts the mode of "subsea production system reconnection to cylindrical FPSO" for development. It is divided into two sets of subsea production systems, 1d (1d/1dSa) and 2d(2d, 5), which are respectively connected back to the newly-built cylindrical FPSO. The 18-1 block of Kaiping 11-4 Oilfield is planned to be put into production in 2029. Crude Oil Metering and Proving System procured in this procurement package will be used on the new cylindrical floating production storage and offloading unit FPSO.
资金到位或资金来源落实情况：已落实。
Source of Funds: yes
项目已具备招标条件的说明：已具备。
Description of Prepared Bidding Conditions: yes
2. 招标内容：Bidding Contents:
货物名称：原油外输计量标定撬
Name of Goods: Crude Oil Metering and Proving System
数量：1套
Quantity: one set
主要技术规格：
艉输系统：详见技术第八章
Main Specifications:
Crude Oil Metering and Proving System: For details, please refer to Chapter 8 of the Technology
交货期和交货地点：
Delivery Schedule & Destination of delivery:
从中华人民共和国关境内提供的货物：
中标通知书签发后12个月以内交货到青岛海工建造现场。
Should arrive at Qingdao Construction Site within 12 months after NOA signed.
从中华人民共和国关境外提供的货物:
中标通知书签发后12个月以内DAP:公司指定的青岛港（INCOTERMS 2010）
DAP Qingdao Port (INCOTERMS 2010) within 12 months after the issuance of the Notice of award
3. 对投标人的资格和业绩要求：
Requirements for Qualification and reference of Bidder:
（1）资格要求
Requirements for Qualification of Bidder
★A.如果投标人为中国境内注册公司，投标人需具有合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照，投标时需提供原件扫描件（原件备查）；
If the Bidder is a company registered within the territory of China, it shall possess a legally valid Business License of an enterprise legal person, Tax Registration Certificate, and Organizational Code Certificate, or a unified business license combining these certificates. When submitting the bid, the Bidder shall provide a scanned copy of the original document (with the originals kept available for verification).
如果投标人为中国境外注册公司，需提供有效的公司登记注册证明；
If the Bidder is a company registered outside the territory of China, it shall provide a valid certificate of company registration.
投标人为分公司的，需具有合法有效的营业执照（境内注册）/公司登记注册证明（境外注册）和上级法人单位授权书（授权该分公司投标和签订合同），投标时需提供原件扫描件（原件备查）。
If the Bidder is a branch company, it shall possess a legally valid business license (for those registered within China) / certificate of company registration (for those registered outside China) and an authorization letter from the superior legal entity (authorizing the branch to bid and sign contracts). When submitting the bid, the branch shall provide scanned copies of the original documents (with the originals kept available for verification).
招标人认可该分公司和上级法人单位的资质、资格和业绩，不认可同一上级法人单位的其它分公司的资质、资格和业绩。分公司与上级法人单位只可一家参与投标，同时参与投标的，投标均无效。
The qualifications, eligibility and performance of the branch and its superior legal entity shall be recognized by the Procuring Entity(Company/Purchaser), while the qualifications, eligibility and performance of other branches under the same superior legal entity shall not be recognized. Only one of the branch and its superior legal entity may participate in the bid; if both participate in the bid, all their bids shall be regarded as invalid bids.
★B.制造商要求:
投标人应是原油外输计量标定橇的专业制造商或代理商。如果投标人是代理 商，那么投标人应得到制造商同意其在中国为本次投标提供该原油外输计量标定橇整橇的合法正式授权并出具制造商唯一合格授权。投标人将投标的货物再授权给其他投标人同时参与投标的，相关的所有投标将被拒绝。
Manufacturer requirement:
The SUPPLIER shall be a professional manufacturer or agent of the Crude Oil Metering and Proving System. If the SUPPLIER is an agent, the SUPPLIER shall obtain the manufacturer's legal and formal authorization to provide the crude oil metering and proving system whole skid for this bid in China and issue the manufacturer's only qualified authorization. If the bidder authorizes other bidders to participate in the bidding process for the goods being tendered, all related bids will be rejected.
★C.投标文件中提供制造商授权书的中标候选人，应在中标候选人公示后3 个工作日内将制造商授权书原件（签字或人名章或公章均须为原件，不接受扫描打印文件）送达招标人联系人进行核验，对于国外制造商授权书原件，投标人提前准备以满足核验原件期限要求。投标文件中提供的制造商授权书可在制造商官方网站上查询并核验一致的或纸质投标已递交制造商授权书原件的，可免于送交原件核验。核验结果不一致的，将按照提供虚假投标资料处理；未能在规定期限内提供原件的，将视为不如实提供材料处理。上述两类情况将取消中标候选人资格及中标资格，并按照中国海油相关制度规定给予禁用等处理。
The winning candidates who provide the manufacturer's authorization letter in the tender documents shall deliver the original manufacturer's authorization letter (the signature, personal seal or official seal must all be the original. Scanned and printed documents will not be accepted) to the contact person of the tenderer for verification within 3 working days after the public announcement of the winning candidates. For the original authorization letter from the foreign manufacturer, the bidder should prepare it in advance to meet the time limit requirement for verifying the original. The manufacturer's authorization letter provided in the tender documents can be verified and verified on the manufacturer's official website. If the original manufacturer's authorization letter has been submitted in the paper tender, it is not necessary to submit the original for verification. If the verification results are inconsistent, it will be dealt with as providing false bidding materials. Failure to provide the original documents within the prescribed time limit will be treated as false provision of materials. The above two types of situations will result in the disqualification of the winning candidate and the winning bid qualification, and will be dealt with in accordance with the relevant regulations of CNOOC, such as being banned.
★D.是否接受联合体投标：否。
Joint Venture: Not Accepted.
★E.未领购招标文件是否可以参加投标:不可以。
Bid without the bidding documents： NOT Available.
（2）★业绩要求Requirement for Bidder's reference:
投标人需满足以下所有要求：
投标人提供的原油外输计量标定系统应为成熟产品，不接受试制品。投标人须满足以下业绩要求：2010年1月1日至投标截止日（以合同签署时间为准），投标人所投原油外输计量标定系统的制造商应具有至少1套原油外输计量标定系统（计量橇整橇最大流量≥3600方每小时，双向球形体积管尺寸≥24英寸，计量模块和标定模块上下布置集成在一个橇内，流量计精度等级应为0.2%或更好，体积管的重复性应为0.02%或更好）的供货业绩（供货业绩的制造商必须是本次投标产品的制造商）。
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括：1）销售合同和2）用户签字或盖章的到货验收材料（到货验收单或调试验收报告或其他可以证明合同项下货物已经到货验收的有效证明材料）。投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、合同签署页（国内贸易合同应有双方盖章，国际贸易合同应有双方签字或盖章）、制造商名称、货物名称、计量橇整橇最大流量、双向球形体积管尺寸、上下成橇、流量计精度等级、体积管重复性、用户签字或盖章的到货验收材料。
未提交业绩证明文件，或通过所提供的业绩证明文件无法认定满足上述业绩要求的，均视为无效业绩。
The crude oil metering and proving system provided by the SUPPLIER should be a mature application product, unused prototype equipment shall not be acceptable. SUPPLIER shall meet the following reference requirements: From January 1, 2010 to the bid deadline (based on the contract signing date), the manufacturer of the crude oil metering and proving system submitted by SUPPLIER shall have at least1 application references of crude oil metering and proving systems, The system technical parameters provided for the performance meet the following technical requirements:total metering skid maximum flow rate ≥ 3600 m3/h, the size of Bidirectional U-Type Sphere Prover ≥ 24 inches,metering module and proving module integrated in one skid by stacking, accuracy class of flowmeter shall be 0.2% or better, repeatability of prover shall be 0.02% or better.The manufacturer of the supply references should be the manufacturer of the bidding product.
SUPPLIER should submit a reference table in the prescribed format and provide relevant reference certification documents. The reference certification documents include: 1) sales contract and 2) inspection documents after delivery signed or stamped by the user (arrival inspection reports or commissioning reports or other valid documents that can prove that the equipment under the contract has been received and accepted). The reference certification documents submitted by the SUPPLIER should include but not limit to: contract signing date, contract signing page (domestic trade contracts should have signatures and seals from both parties, international trade contracts should have signatures or seals from both parties), manufacturer name, name of goods, total metering skid maximum flow rate, the size of Bidirectional U-Type Sphere Prover, stacking integration, accuracy class of flowmeter, repeatability of prover and arrival inspection documents signed or stamped by the user.
Failure to submit reference certification documents, or failure to meet the above reference requirements, shall be deemed as invalid reference.
.
（3）★体系认证要求：
投标人须具备有效的GB/T19001 (或ISO9001)质量体系认证证书，由中国国内机构发证的可在中国国家认证认可监督管理委员会网站 (http：//www. cnca.gov. cn/)核实。投标时需提供相关证书的扫描件。
GB/T or ISO certificates- requirement ：
The bidder must have valid GB/T19001 (or ISO9001) certificate. The certificates which issued by China’ s domestic institutions should can be verified on the website of China National Certification and Accreditation Administration (http：//www. cnca. gov. cn/). Bidders must provide scanned copies of the certificates.
4. 有兴趣的投标人可通过以下方式获取招标文件：从2025年12月26日开始至2026年1月6日止，请登录系统(）的招标公告页面进行购买。首次登录必须先进行注册，注册成功后，方可购买招标文件。投标人须在线填写购买招标文件登记表，并在线支付标书款，支付成功后，投标人可自行下载招标文件。
本招标项目仅供正式会员查看，您的权限不能浏览详细信息,请注册本网会员并成为正式会员后可下载详细的招标公告、报名表格、项目附件和部分项目招标文件等。
联系人：陈经理
手机：13611390867
电话：010-89940160
邮箱：kefu@dljczb.com
QQ：2830892928
请登录查看