招标项目名称：中海壳牌惠州三期乙烯项目火炬气回收热值及氧分析仪系统
Project Name:CSPC Huizhou Phase 3 Ethylene Project Torch Gas Recovery Calorific Value and Oxygen Analyzer System
招标编号：0704-2640JDCP0282/01
Bid No.：0704-2640JDCP0282/01
日期：2026年1月29日
Date : Jan 29th, 2026
中化建国际招标有限责任公司（以下称为“招标代理机构”），中国海洋石油集团有限公司的全资子公司，受中海壳牌石油化工有限公司（以下称为“招标人”）委托，就中海壳牌惠州三期乙烯项目所需部分货物及相关服务进行国际公开招标。现邀请投标人对下列货物和服务提交电子密封投标：
CNCCC International Tendering Co., Ltd., a wholly-owned subsidiary of China National Offshore Oil Corporation (CNOOC), (hereinafter referred to as “the Procurement Agency”), entrusted by CNOOC and Shell Petrochemicals Company Limited (hereinafter referred to as “Procuring Entity(Company/Purchaser)”), intends to organize an International Competitive Bidding for the purchase of the Goods and the relevant services required under the project of CSPC Huizhou Phase 3 Ethylene. Bidders are kindly requested to submit their electronically sealed bids for the following Goods and Services.
1. 招标条件 Preconditions for Solicitation
项目概况：中海壳牌石油化工有限公司（以下简称“中海壳牌”）拟在广东惠州大亚湾石化产业园区新建中海壳牌惠州三期乙烯项目，以实现其打造世界级、高度一体化的石化基地的愿景。
Project Summary：CNOOC and Shell Petrochemical Company Limited (hereinafter referred to as “CSPC”) intends to build CSPC Huizhou Phase 3 Ethylene Project in Daya Bay Petrochemical Industrial Park, Huizhou, Guangdong Province to realize the vision of creating a world-class and highly integrated petrochemical base.
资金到位或资金来源落实情况：已落实。
Fund availability or the status of fund source confirmation: Confirmed.
项目已具备招标条件的说明：已具备。
Statement on whether the Project is ready for solicitation: Ready
2. 招标内容Subject Matter of Procurement
货物名称：火炬气回收热值及氧分析仪系统
Name of Goods: Torch Gas Recovery Calorific Value and Oxygen Analyzer System
数量：1套热值分析仪（残氧燃烧法），1套顺磁氧分析仪，含1套分析小屋及配套的预处理系统、分析系统等
Quantity: 1 set of calorific value analyzer (residual oxygen combustion method), 1 set of paramagnetic oxygen analyzer, including 1 set of analysis cabin and the supporting pretreatment system, analysis system, etc.
主要技术规格：性能应满足下列要求：
1）顺磁氧分析仪：线性误差：≤1%FS；重复性：≤1%FS；响应时间：T90小于10S；零点漂移：不大于0.5%/月；量程漂移：不大于0.5%/月。量程：0～5%。
2）热值分析仪精度：≤1%FS；测量原理采用残氧燃烧法。量程：0～200000 kJ/Nm3
Main Specifications:Performance should meet the following requirements:
1）Paramagnetic Oxygen Analyzer:
l Linear error: ≤1% FS
l Repeatability: ≤1% FS
l Response time: T90 < 10 seconds
l Zero drift: ≤0.5% per month
l Span drift: ≤0.5% per month
l Range:0～5%
2）Calorific Value Analyzer:
l Accuracy: ≤1% FS
l Measurement principle: residual oxygen combustion method
l Range:0～200000 kJ/Nm3
交货期：
Delivery Schedule:
从中华人民共和国关境内提供的货物：2027年1月30日前（货到项目现场时间）
For Goods to be offered and supplied from within PRC customs territory: on or before JAN 30th, 2027 (arrival date to the job site)
从中华人民共和国关境外提供的货物:2026年12月30日前（提单发货时间）
For Goods to be offered and supplied from outside PRC customs territory: on or before Dec 30th,2026 (departure date on Bill of Lading)
交货地点Destination of delivery:
从中华人民共和国关境内提供的货物：中海壳牌惠州三期乙烯项目现场
For Goods to be offered and supplied from within PRC customs territory:Job Site of CSPC Huizhou Phase 3 Ethylene Project
从中华人民共和国关境外提供的货物：CIF中国深圳盐田港
For Goods to be offered and supplied from outside PRC customs territory: CIF (Yantian Seaport, Shenzhen)
3. 对投标人的资格和业绩要求
Requirements for Qualifications and the Past Performance of the Bidder:
（1）资格要求Requirements for Qualifications of the Bidder★
A. 如果投标人为中国境内注册公司，投标人需具有合法有效的企业法人营业执照、税务登记证及组织机构代码证或证照合一的营业执照，投标时需提供原件扫描件（原件备查）；
If the Bidder is a company registered within the territory of China, it shall possess a legally valid Business License of an enterprise legal person, Tax Registration Certificate, and Organizational Code Certificate, or a unified business license combining these certificates. When submitting the bid, the Bidder shall provide a scanned copy of the original document (with the originals kept available for verification).
如果投标人为中国境外注册公司，需提供有效的公司登记注册证明；
If the Bidder is a company registered outside the territory of China, it shall provide a valid certificate of company registration.
投标人为分公司的，需具有合法有效的营业执照（境内注册）/公司登记注册证明（境外注册）和上级法人单位授权书（授权该分公司投标和签订合同），投标时需提供原件扫描件（原件备查）。
If the Bidder is a branch company, it shall possess a legally valid business license (for those registered within China) / certificate of company registration (for those registered outside China) and an authorization letter from the superior legal entity (authorizing the branch to bid and sign contracts). When submitting the bid, the branch shall provide scanned copies of the original documents (with the originals kept available for verification).
招标人认可该分公司和上级法人单位的资质、资格和业绩，不认可同一上级法人单位的其它分公司的资质、资格和业绩。分公司与上级法人单位只可一家参与投标，同时参与投标的，投标均无效。
The qualifications, eligibility and performance of the branch and its superior legal entity shall be recognized by the Procuring Entity(Company/Purchaser), while the qualifications, eligibility and performance of other branches under the same superior legal entity shall not be recognized. Only one of the branch and its superior legal entity may participate in the bid; if both participate in the bid, all their bids shall be regarded as invalid bids.
B. 本次不接受代理Bid by agent is not accepted
投标人应为所投产品（火炬气回收热值和氧分析仪系统）的制造商。集成商视为制造商。如投标人为制造商同一集团负责销售投标所投产品的全资子公司、控股子公司（投标人应提供制造商或其上级公司证明上述事项的证明文件），则视投标人为制造商。
Bid by Agent is not accepted.The bidder shall be the manufacturer of the products (Torch Gas Recovery Calorific Value and Oxygen Analyzer System ), the integrator considers the manufacturer. If the bidder is a wholly-owned or holding subsidiary of the same group as the manufacturer responsible for the sales of the products being tendered (the bidder shall provide a certificate from the manufacturer or its superior company to prove the above matters), the bidder shall be regarded as the manufacturer.
C. 是否接受联合体投标：否
Is any bid by a consortium or a joint venture accepted? No.
D. 未领购招标文件是否可以参加投标:不可以
Can a bidder participate in the bidding without purchasing the Solicitation Document? No.
E.其它:如投标人为制造商同一集团负责销售投标所投产品的全资子公司、控股子公司（投标人应提供制造商或其上级公司证明上述事项的证明文件），则视投标人为制造商。？投标产品由制造商不同工厂生产且使用相同品牌时，予以接受。
others: If the bidder is a wholly-owned subsidiary or holding subsidiary of the same group as the manufacturer responsible for sales of the bidding products, the bidder shall provide relevant evidence documents from the manufacturer or its superior company to prove the above matters, and in such case the bidder shall be deemed as the manufacturer. The bidding product produced by different factories of the manufacturer with the same brand shall be accepted.
同一集团全球范围内不同制造商（即同一集团旗下的全资子公司或控股子公司或制造工厂）制造的所投产品的业绩，视为投标人所投产品的制造商的业绩；投标人应提供说明函，说明本次所投产品的制造商与满足上述业绩要求的产品制造商属于同一集团。
The performance of the products submitted by different manufacturers within the same group (i.e., wholly-owned subsidiaries, holding subsidiaries or manufacturing plants under the same group) is regarded as the performance of the manufacturer of the products submitted by the bidder; the bidder should provide an explanatory letter to state that the manufacturer of the products submitted in this bid and the manufacturer of the products meeting the above performance requirements belong to the same group.
（2）资质要求Qualification requirement：
所投分析仪本体在有效期内的防爆合格证书，证书中应体现一区防爆、防爆等级不低于IIC T4，防爆合格证书应由NEPSI、CQST、PCEC、IECEx、ATEX之一或国家认可的其他防爆检验机构出具。
The explosion-proof certificate of the analyzer body is valid within the validity period. The certificate should reflect that the explosion-proof level of the first zone is not lower than IIC T4. The explosion-proof certificate should be issued by one of NEPSI, CQST, PCEC, IECEx, ATEX or other nationally recognized explosion-proof inspection agencies.
（3）业绩要求Requirement for Bidder's Past Performance:
2016年1月1日至投标截止日(以合同签署时间为准)，投标文件应同时满足以下业绩要求（可接受以下两项要求同时体现在一个合同）：
From January 1st, 2016 to the deadline for submission of the bid (subject to the signing time of the contract), the tender documents should simultaneously meet the following performance requirements (it is acceptable for both of the following two requirements to be reflected in one contract)：
① 投标人至少具有1个分析仪表系统集成的合同业绩。
①The bidder shall have at least one contract performance record of integrating an analytical instrument system.
②投标的热值分析仪制造商至少有1个测量原理为残氧燃烧法的合同业绩。②The heat value analyzer manufacturer bidding must have at least one contract performance using the residual oxygen combustion method as the measurement principle.
投标人须按规定格式提交业绩表，并提交相关业绩证明文件。业绩证明文件包括：销售合同复印件。
The bidder shall submit the Performance Form in the specified format and provide the relevant performance certification documents. The performance certification documents include: Copies of sales contract.
投标人所提交的业绩证明文件必须至少体现以下内容：合同签署时间、合同签署页（国内贸易合同应有双方盖章，国际贸易合同应有双方签字或盖章）、货物名称、热值分析仪原理。
The performance certification documents submitted by the bidder must include at least the following contents: the contract signing date; the contract signature page (China domestic trade contracts shall be stamped by the buyer and the seller, while international trade contracts shall be signed or stamped by the buyer and the seller); name of goods, Principle of calorific value analyzer.
若业绩合同为年度协议，除提供年度协议外，还应提供相应的已到货订单，订单内容或编号应与年度协议相关联。同一个年度协议下，提供1个或以上的订单，均视为1个有效业绩。
If the contract is an annual framework agreement, in addition to the agreement itself, the corresponding Purchase Order(s) (PO)(under which the goods were delivered) shall also be provided, and the purchase order content or PO numbering shall be associated with the annual framework agreement. Under the same annual framework agreement, one or more purchase orders corresponding to the orders shall be deemed as one valid performance.
未提交业绩证明文件，或通过所提供的业绩证明文件无法认定满足上述业绩要求的，均被视为无效业绩。
Failure to submit the past performance certification documents, or inability to verify that the above performance requirements are met through the performance certification documents so provided, shall be deemed as invalid performance.
4. 有兴趣的投标人可通过以下方式获取招标文件
Interested bidders may obtain the solicitation documents through the following method:
从2026年1月29日开始至2026年2月5日止，请登录中国海油供应链数字化平台(https://bid.cnooc.com.cn）的“招标公告”页面进行购买。
Bidders are requested to log in to the "招标公告" (Notice of Procurement ) page of the CNOOC Supply Chain Digital Platform (https://bid.cnooc.com.cn) to purchase the Solicitation Documents from Jan 29th , 2026 to Feb 5th , 2026.
首次登录必须先进行注册，注册方式选择“自主注册公开招标”。选择其他注册方式将导致注册失败。注册成功后，方可购买招标文件。
For the first-time login to the platform, registration is mandatory (free of charge). The registration method must be "自主注册公开招标" (Self-Registration for Public Bidding). Choosing other registration methods will result in a registration failure. Only after successful registration can a bidder purchase the Solicitation Documents.
投标人须在线填写“购买招标文件登记表”，并在线支付标书款。支付成功后，投标人可自行下载招标文件。
本招标项目仅供正式会员查看，您的权限不能浏览详细信息,请注册本网会员并成为正式会员后可下载详细的招标公告、报名表格、项目附件和部分项目招标文件等。
联系人：陈经理
手机：13611390867
电话：010-89940160
邮箱：kefu@dljczb.com
QQ：2830892928
请登录查看